Cold-Formed Steel Sheet Pile U Type 2 Type 3 Steel Sheet Pile Is On Sale Can Be Contacted At Any Time
PRODUCT PRODUCTION PROCESS
The production process of cold-formed U-shaped steel sheet piles usually includes the following steps:
Raw material preparation: Prepare the raw materials for U-shaped steel sheet piles, usually hot-rolled steel plates or cold-rolled steel plates.
Plate rolling: The raw steel plate is fed into the plate rolling machine for plate rolling processing to shape it into a U-shaped cross section.
Cold bending: The rolled steel plate is cold-bent, and the steel plate is formed by a cold bending machine or bending machine to make it a U-shaped cross-section.
Cutting: Use cutting equipment to cut the sheet piles to the appropriate size based on the required length.
Welding (if necessary): Perform the necessary welding process on cold-formed U-shaped steel sheet piles to ensure that the connection is firm and meets relevant standards.
Surface treatment: Surface treatment is performed on the finished product, such as rust removal, painting, etc., to improve the anti-corrosion performance of the product.
Inspection and Quality Control: Inspection of finished products to ensure they meet the requirements of relevant standards and specifications.
Packaging and Shipping: Pack the finished product and arrange for shipping to the customer or job site.
These steps may vary according to different production processes and equipment, but are usually the basic steps of the production process of cold-formed U-shaped steel sheet piles.
|
Product Name
|
|
|
Steel Grade
|
S275,S355,S390,S430,SY295,SY390,ASTM A690
|
|
Production standard
|
EN10248,EN10249,JIS5528,JIS5523,ASTM
|
|
Delivery time
|
One week,80000 tons in stock
|
|
Certificates
|
ISO9001,ISO14001,ISO18001,CE FPC
|
|
Dimensions
|
Any dimensions,any width x height x thickness
|
|
Length
|
Single length up to over 80m
|
1. We can produce all types of sheet piles,pipe piles and accessories,we can adjust our machines to produce in any width x height x thickness .
2. We can produce single length up to over 100m,and we can do all painting,cutting,welding etc fabrications in factory .
3. Fully internationally certified:ISO9001,ISO14001,ISO18001,CE,SGS,BV etc..
*Send the email to chinaroyalsteel@163.com to get a quotation for your projects
Section Modulus Range
1100-5000cm3/m
Width Range (single)
580-800mm
Thickness Range
5-16mm
Production Standards
BS EN 10249 Part 1 & 2
Steel Grades
SY295, SY390 & S355GP for Type II to Type VIL
S240GP, S275GP, S355GP & S390 for VL506A to VL606K
Length
27.0m maximum
Standard Stock Lengths of 6m, 9m, 12m, 15m
Delivery Options
Single or Pairs
Pairs either loose, welded or crimped
Lifting Hole
By container (11.8m or less) or Break Bulk
Corrosion Protection Coatings
| Section | Width | Height | Thickness | Cross Sectional Area | Weight | Elastic Section Modulus | Moment of Inertia | Coating Area (both sides per pile) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| (w) | (h) | Flange (tf) | Web (tw) | Per Pile | Per Wall | |||||
| mm | mm | mm | mm | cm2/m | kg/m | kg/m2 | cm3/m | cm4/m | m2/m | |
| Type II | 400 | 200 | 10.5 | - | 152.9 | 48 | 120 | 874 | 8,740 | 1.33 |
| Type III | 400 | 250 | 13 | - | 191.1 | 60 | 150 | 1,340 | 16,800 | 1.44 |
| Type IIIA | 400 | 300 | 13.1 | - | 186 | 58.4 | 146 | 1,520 | 22,800 | 1.44 |
| Type IV | 400 | 340 | 15.5 | - | 242 | 76.1 | 190 | 2,270 | 38,600 | 1.61 |
| Type VL | 500 | 400 | 24.3 | - | 267.5 | 105 | 210 | 3,150 | 63,000 | 1.75 |
| Type IIw | 600 | 260 | 10.3 | - | 131.2 | 61.8 | 103 | 1,000 | 13,000 | 1.77 |
| Type IIIw | 600 | 360 | 13.4 | - | 173.2 | 81.6 | 136 | 1,800 | 32,400 | 1.9 |
| Type IVw | 600 | 420 | 18 | - | 225.5 | 106 | 177 | 2,700 | 56,700 | 1.99 |
| Type VIL | 500 | 450 | 27.6 | - | 305.7 | 120 | 240 | 3,820 | 86,000 | 1.82 |
Section Modulus Range
1100-5000cm3/m
Width Range (single)
580-800mm
Thickness Range
5-16mm
Production Standards
BS EN 10249 Part 1 & 2
Steel Grades
SY295, SY390 & S355GP for Type II to Type VIL
S240GP, S275GP, S355GP & S390 for VL506A to VL606K
Length
27.0m maximum
Standard Stock Lengths of 6m, 9m, 12m, 15m
Delivery Options
Single or Pairs
Pairs either loose, welded or crimped
Lifting Hole
By container (11.8m or less) or Break Bulk
Corrosion Protection Coatings
PRODUCT CONSTRUCTION
First, the characteristics of cold formed steel sheet pile
1, easy processing
Steel sheet piles are relatively simple in processing and do not require too many complex techniques or tools. Because the steel sheet piles in the manufacturing of the thick steel plate only need to be cut, welding, repair and other simple processing.
2, convenient construction
Because it is lightweight and extremely flexible, it is easy to install, and therefore very convenient in the construction process. In addition, because the steel sheet pile does not need to be poured concrete on site during the installation process, the possibility of polluting the environment can be avoided.
3, high strength
Sheet pile has high strength and stiffness, can bear large lateral and longitudinal loads, and has small deformation. Steel sheet piles is a very suitable component for those places that need to bear large loads in deep foundation pits or earthwork excavation projects.
APPLICATION
Advantages of steel pipe pile
1. Wide applicability
Steel sheet pile has a wide range of applications and can be used in various anchoring systems. It has good adaptability in both soil and water, and can be applied to construction projects, shipyards and wharves where both may exist, and can also be used to support deep foundation pits and metal storage tanks.
2, with good corrosion resistance
Because sheet piling are made of high-strength steel sheets, they have good corrosion resistance and can be used in a variety of harsh environments.
3. Long life
The cold formed steel sheet pile has a long service life, can adapt to various climatic conditions and external environmental changes, and has excellent rust prevention function.
PACKAGING AND SHIPPING
Q235 Steel Sheet Pile should be placed in a sunshade and rainproof place during storage. Long-term exposure to sunlight and rain, light will make the surface of the steel sheet pile appearance changes, heavy may lead to rust, seriously affecting the service life and effect. Therefore, be sure to choose a covered storage place, or use rainproof and sunshade cloth to cover the steel pipe pile construction
COMPANY STRENGTH
Made in China, first-class service, cutting-edge quality, world-renowned
1. Scale effect: Our company has a large supply chain and a large steel factory, achieving scale effects in transportation and procurement, and becoming a steel company that integrates production and services
2. Product diversity: Product diversity, any steel you want can be purchased from us, mainly engaged in steel structures, steel rails, steel sheet piles, photovoltaic brackets, channel steel, silicon steel coils and other products, which makes it more flexible Choose the desired product type to meet different needs.
3. Stable supply: Having a more stable production line and supply chain can provide more reliable supply. This is especially important for buyers who require large quantities of steel.
4. Brand influence: Have higher brand influence and larger market
5. Service: A large steel company that integrates customization, transportation and production
6. Price competitiveness: reasonable price
*Send the email to chinaroyalsteel@163.com to get a quotation for your projects
CUSTOMERS VISIT
FAQ
1. How can I get a quotation from you ?
You can leave us message, and we will reply every message in time . Or we may talk on line by WhatsApp . And you can also find our contact information on contact page .
2. Can I get samples before order ?
Yes, of course. Usually our samples are free . we can produce by your samples or technical drawings . We can build the molds and fixtures .
3. What is your delivery time ?
A. The time of delivery is usually around 1 month(1*40FT as usual) ;
B. We can send out in 2 days , if it has stock .
4. What is your payment terms ?
Our usual payment term is 30% deposite, and rest against B/L. L/C is also acceptatble .
5. How can you garantee what I got will be good ?
We are factory with 100% pre-delivery inspection which garantee the quality .
And as golden supplier on Alibaba , Alibaba assurance will make garanteewhich means alibaba will pay your money back in advance , if there is any problem with the products .
6. How do you make our business long-term and good relationship ?
A. We keep good quality and competitive price to ensure our customers benefit ;
B. We respect every customer as our friend and we sincerely do business and make friends with them no matter where they come from
Products categories
-
High Quality Factory Wholesale Carbon Steel Pla...
-
GB Standard Cold-Rolled Grain Oriented Silicon ...
-
T2 C11000 Acr Copper Tube TP2 C10200 3 Inch Cop...
-
DIN 536 Crane Steel Rail A45 A55 A65 A75 A100 A...
-
Steel Shed Warehouse Prefabricated House Frame ...
-
Steel Sheet Pile Factory Az12/Au20/Au750/Az580/...